Recent Advances in Science and Technology Research Vol. 7

Authors

Dr. Natt Makul, (Editor)
Assistant Professor, Building Technology, Faculty of Industrial Technology, Phranakhon Rajabhat University, Thailand.
Uche C. Ogbuefi
Africa Centre of Excellence (ACE-SPED), University of Nigeria, Nsukka, Enugu State, Nigeria and Department of Electrical Engineering, University of Nigeria, Nsukka, Enugu State, Nigeria.
Princewill C. Ene
Department of Electrical and Electronics Engineering, Enugu State University of Science and Technology, Nigeria.
Prince A. Okoro
Department of Electrical Engineering, University of Nigeria, Nsukka, Enugu State, Nigeria.
Frank Herrmann
OTH Regensburg, Innovation and Competence Centre for Production Logistics and Factory Planning, P.O.Box 120327, Regensburg 93025, Germany.
Amos Avny
Omnidev International, Israel.
G. A. Akeke
Department of Civil Engineering, University of Nigeria, Nsukka, Enugu State, Nigeria.
D. E. Ewa
Department of Civil Engineering, Cross River University of Technology, Calabar, Cross River State, Nigeria.
F. O. Okafor
Department of Civil Engineering, University of Nigeria, Nsukka, Enugu State, Nigeria.
Feriel Mekki
Department of Architecture, University of Badji Mokhtar, P.B.N°12, Sidi Amar, Annaba, 23000, Algeria and Laboratory of Soil and Hydraulics, University of Badji Mokhtar, P.B.N°12, Sidi Amar, Annaba, 23000, Algeria.
Mohamed Meksaouine
Laboratory of Soil and Hydraulics, University of Badji Mokhtar, P.B.N°12, Sidi Amar, Annaba, 23000, Algeria and Department of Hydraulics, University of Badji Mokhtar, P.B.N°12, Sidi Amar, Annaba, 23000, Algeria.
Dipo Theophilus Akomolafe
Departmnet of Mathematical Sciences, Faculty of Sciences, Olusegun Agagu University of Science and Technology, Okitipupa, Nigeria.
Stanley Fore
Cape Peninsula University of Technology, South Africa.
Sharon Chironziwa Chipeperekwa
Cape Peninsula University of Technology, South Africa.
Naïma Bou m’handi
Seafood Processing Technology Center (CSVTPM), National Research Institute of Marine Fisheries (INRH), BP: 1050, Agadir, Morocco.
Mohammad Moneruzzaman Khandaker
School of Agriculture Science & Biotechnology, Faculty of Bioresources and Food Industry, Universiti Sultan Zainal Abidin (UniSZA), Besut Campus, 22200 Besut, Terengganu, Malaysia.
Noor Afiza Badaluddin
School of Agriculture Science & Biotechnology, Faculty of Bioresources and Food Industry, Universiti Sultan Zainal Abidin (UniSZA), Besut Campus, 22200 Besut, Terengganu, Malaysia.
Mohammad Hailmi Sajili
School of Agriculture Science & Biotechnology, Faculty of Bioresources and Food Industry, Universiti Sultan Zainal Abidin (UniSZA), Besut Campus, 22200 Besut, Terengganu, Malaysia.
Nornasuha Yusoff
School of Agriculture Science & Biotechnology, Faculty of Bioresources and Food Industry, Universiti Sultan Zainal Abidin (UniSZA), Besut Campus, 22200 Besut, Terengganu, Malaysia.
Khamsah Suryati Mohd
School of Agriculture Science & Biotechnology, Faculty of Bioresources and Food Industry, Universiti Sultan Zainal Abidin (UniSZA), Besut Campus, 22200 Besut, Terengganu, Malaysia.
Alyaa H. Hatem
Department of Physics, College of Education for Girls, Kufa University, Iraq.
Eman A. Al-Hilo
Department of Physics, College of Education for Girls, Kufa University, Iraq.
Saleem A. Hussain
Department of Physics, College of Education, Al-Qadisiyah University, Iraq.

Synopsis

This book covers key areas of Science and Technology. The contributions by the authors include Actual power consumption, economic sense, house hold, prepaid meter, distribution companies, tariff, New Prepaid Meter, Scheduling, optimization model, real world application, priority rules, Enterprise Resource Planning System, high performance scheduling algorithms, Engineering, human needs & desires, emotional engineering, Engineering and Mete-Engineering, vague desires and fuzzy ideas, Science and Industry, Spiritual aspects of Social life, Culture and Tradition, Compressive strength, concrete, Rice Husk Ash (RHA), variability, pozzolanic values, elemental composition, Concrete, Collapse load, failure mechanism, frictional soil, ground anchor, kinematic approach, limit  analysis, criterion of Mohr-Coulomb, friction angle of the soil, failure of cohesionless soil, System, organisation, security, monitoring, manual and automation, automated motor vehicle management system, electronic control units (ECUs), Information technology, student registration system, challenges and success, Success Factors, Haloarchaea, diversity, biocompounds, biotechnology, Halophiles, Polyhydroxyalkanoates (PHAs), Triacontanol, plant growth and development, Bougainvillea, TRIA treatment, enhanced inflorescence development, Thin films, zinc oxide, structural properties, optical band gap, XRD and UV-VIS techniques, conductive transparent oxides (TCO), chemical vapor deposition CVD etc. This book contains various materials suitable for students, researchers and academicians in the field of Science and Technology.

Chapters

  • Chapter 1
    House Hold Actual Average Power Consumption with New Prepaid Meter Tariff - An Incident from Distribution Companies
    Uche C. Ogbuefi, Princewill C. Ene, Prince A. Okoro
  • Chapter 2
    Generic Scheduling by an Optimization Model Demonstrated for a Partly Automated Production Line
    Frank Herrmann
  • Chapter 3
    A Thorough Discussion on Social Aspects of Engineering
    Amos Avny
  • Chapter 4
    Investigating the Effects of Variability in Pozzolanic Properties of Rice Husk Ash on Compressive Strength of Concrete
    G. A. Akeke, D. E. Ewa, F. O. Okafor
  • Chapter 5
    Theoretical Study of Behavior of Ground Anchor in Frictional Soil by the Use of the Kinematic Approach of Limit Analysis
    Feriel Mekki, Mohamed Meksaouine
  • Chapter 6
    Experiments Using Database Management System to Develop and Implement an Automated Motor Vehicle Management System
    Dipo Theophilus Akomolafe
  • Chapter 7
    Challenges and Success Factors in Introducing Information Systems for Students’ Online Registration: A Case Study of a University of Technology
    Stanley Fore, Sharon Chironziwa Chipeperekwa
  • Chapter 8
    Halophilic Archaea: Diversity and Biotechnological Applications
    Naïma Bou m’handi
  • Chapter 9
    The Effect of 1-Triacontanol on the Growth, Flowering, and Quality of Potted Bougainvillea Plants (Bougainvillea glabra var. ‘‘Elizabeth Angus’’)
    Mohammad Moneruzzaman Khandaker, Noor Afiza Badaluddin, Mohammad Hailmi Sajili, Nornasuha Yusoff, Khamsah Suryati Mohd
  • Chapter 10
    Investigation on the Thickness Effect on the Structural and Optical Properties of ZnO Thin Films Prepared by Thermal Evaporation Technique
    Alyaa H. Hatem, Eman A. Al-Hilo, Saleem A. Hussain
Cover for Recent Advances in Science and Technology Research Vol. 7
Media Promotion: Chapter 01
Media Promotion: Chapter 02
Media Promotion: Chapter 03
Media Promotion: Chapter 04
Media Promotion: Chapter 05
Media Promotion: Chapter 06
Media Promotion: Chapter 07
Media Promotion: Chapter 08
Media Promotion: Chapter 09
Media Promotion: Chapter 10
DOI: https://doi.org/10.9734/bpi/rastr/v7
Copyright (c) 2020 Authors. The licensee is the publisher (Book Publisher International).

Details about the available publication format: PDF

ISBN-13 (15)
978-93-90431-52-6

Article Metrics

PlumX

See Details