Recent Developments in Engineering Research Vol. 7

Authors

Dr. SungCheal Moon, (Editor)
Department of Polymer Engineering, Industrial Technology Support Division, Korea Institute of Materials Science (KIMS), Republic of Korea.
Yolanda M. Fernández-Ordóñez
Geomatics Laboratory, College of Postgraduates in Agricultural Sciences, Campus Montecillo, Texcoco, Mexico.
Jesús Soria-Ruiz
Geomatics & Agro-Climatology Lab., National Institute of Research for Forestry Agricultural and Livestock (INIFAP), Toluca, Mexico.
Luis Alberto Ovando-Brito
Tecnológico de Estudios Superiores de Coacalco, México.
T. J. Jeyaprabha
Department of Electronics and Communication Engineering, Sri Venkateswara College of Engineering, Chennai, Tamil Nadu, India.
G. Sumathi
Department of Information Technology, Sri Venkateswara College of Engineering, Chennai, Tamil Nadu, India.
A. Abijith
Department of Electronics and Communication Engineering, Sri Venkateswara College of Engineering, Chennai, Tamil Nadu, India.
K. Guruprasanth
Department of Electronics and Communication Engineering, Sri Venkateswara College of Engineering, Chennai, Tamil Nadu, India.
Chiranjeevraja Thillaiganesh
Department of Electronics and Communication Engineering, Sri Venkateswara College of Engineering, Chennai, Tamil Nadu, India.
D. Amirtharaj
Department of Mechanical Engineering, Bannari Amman Institute of Technology, Erode, India.
G. Rajamurugan
School of Mechanical Engineering, Vellore Institute of Technology, Vellore, India.
S. Sivachidambaram
Department of Mechanical Engineering, Bannari Amman Institute of Technology, Erode, India.
D. Dinesh
Department of Mechanical Engineering, Bannari Amman Institute of Technology, Erode, India.
S. Sivachidambaram
Department of Mechanical Engineering, Bannari Amman Institute of Technology, Erode, India.
Bulusu Rama
Formerly Department of Computer Science and Engineering, MLR Institute of Technology, Hyderabad, Telangana, India.
Mohammed Ismaeil
Department of Civil Engineering, College of Engineering, University of Prince Mugrin, Saudi Arabia. 2Sudan University for Science and Technology, Khartoum, 79371, Sudan.
Yu. V. Sharikov
Saint-Petersburg Mining University, Saint Petersburg, Russian Federation.
F. Yu. Sharikov
Saint-Petersburg Mining University, Saint Petersburg, Russian Federation.
K. A. Krylov
Saint-Petersburg Mining University, Saint Petersburg, Russian Federation.
Bi Bolou Zehero
Institut National Polytechnique - Houphouët Boigny, Yamoussoukro, Côte d’Ivoire and Direction Générale des Douanes, République Côte d’Ivoire.
Pacôme Brou
Ecole Supérieure Africaine des TIC- ESATIC, Abidjan-Treichville, Côte d’Ivoire.
Olivier Asseu
Institut National Polytechnique - Houphouët Boigny, Yamoussoukro, Côte d’Ivoire.
Kaushik V. Prasad
Department of Mechanical Engineering, FET-Jain University, Ramanagara-562112, Karnataka, India.
H. Adarsha
Department of Mechanical Engineering, FET-Jain University, Ramanagara-562112, Karnataka, India.
Richard Job Madapat
Industrial & Mechanical Engineering, The University of Illinois, Chicago – 60607, USA.
A. H. Khan
Department of Civil Engineering, Gandhi Institute of Technology and Management, Visakhapatnam, A. P, India.
K. V. G. D. Balaji
Department of Civil Engineering, Gandhi Institute of Technology and Management, Visakhapatnam, A. P, India.
K. Ramadevi
Department of Civil Engineering, Kumaraguru College of Technology, Coimbatore, India.
S. Deepa Shri
Hindusthan College of Engineering and Technology, Coimbatore, India.
S. K. Shivaranjani
Department of Civil Engineering, Kumaraguru College of Technology, Coimbatore, India.

Synopsis

This book covers key areas of Engineering Research. The contributions by the authors include Process development framework, software engineering, cloud, geodatabases, Wireless Pulse oximeter, remote patient monitoring, heart rate, SpO2, internet of things, Friction stir processing, boron carbide, tool geometry, Modification of Aluminium 6063, Friction stir welding, transverse feed, axial force, Aluminium Alloys AA 5383/AA 7075, 3D fractals, recursion, sierpinski gasket closedness, self-similarity, Pushover analysis, demand curve, capacity curve, plastic hinge, SAP2000, performance point, Sudan, RC Building, Tubular rotary kiln, temperature fields, lining, 3D modeling, monitoring, control, sintering processes, Petroleum coke, coke analysis, TG/DSC technique, coke oxidation stability, kinetic modeling, tubular kiln simulation, process optimization, Data mining, customs offences, unsupervised method, principle of Apriori, frequent motive, rule of association, extraction of knowledge, Nanocomposite coatings, thin film coatings, machinability, stainless steels, PVD coatings, Bending compression, direct compression, partial safety factor, standard deviation, coefficient of variation, reliability index, probability of failure, Concrete, Hemp fibre, aspect ratio, RC beam, two-point load, Ziram, solar, photocatalyst, UV, UV/ TiO2 etc.  This book contains various materials suitable for students, researchers and academicians in the field of Engineering Research.

Chapters

  • Chapter 1
    Recent Approach on a Software (MP-GEO) Process Framework for Guiding the Specification of Geospatial Databases in the Cloud
    Yolanda M. Fernández-Ordóñez, Jesús Soria-Ruiz, Luis Alberto Ovando-Brito
  • Chapter 2
    Studies on the Implementation of Remote Patient Monitoring Using Wireless Pulse Oximeter
    T. J. Jeyaprabha, G. Sumathi, A. Abijith, K. Guruprasanth, Chiranjeevraja Thillaiganesh
  • Chapter 3
    Emphasizing the Effects of Tool Geometry on Surface Modification of Aluminium 6063 by Friction Stir Processing
    D. Amirtharaj, G. Rajamurugan, S. Sivachidambaram, D. Dinesh
  • Chapter 4
    Results on Optimizing the Parameters for Friction Stir Welding of Dissimilar Aluminium Alloys AA 5383/AA 7075
    S. Sivachidambaram, G. Rajamurugan, D. Amirtharaj
  • Chapter 5
    The Study on the Evaluation of Closedness and Self-Similarity of 3D Fractals
    Bulusu Rama
  • Chapter 6
    Study on Seismic Capacity Assessment of Existing RC Building by Using Pushover Analysis
    Mohammed Ismaeil
  • Chapter 7
    Mathematical Modeling and Optimal Control of Sintering Processes in Rotary Tubular Kilns
    Yu. V. Sharikov, F. Yu. Sharikov, K. A. Krylov
  • Chapter 8
    Recent Research: Elicitation of Association Rules from Information on Customs Offences on the Basis of Frequent Motives
    Bi Bolou Zehero, Pacôme Brou, Olivier Asseu
  • Chapter 9
    Nanocomposite Coatings: Properties and Applications in Machining
    Kaushik V. Prasad, H. Adarsha, Richard Job Madapat
  • Chapter 10
    A Comparative Analytical Study of Probability of Failure of Concrete in Bending and Direct Compression as per IS 456:2000 and as per IS 456:1978
    A. H. Khan, K. V. G. D. Balaji
  • Chapter 11
    Studying the Flexural Behaviour of Hemp Fiber Reinforced Concrete Beams
    K. Ramadevi, S. Deepa Shri
  • Chapter 12
    Advanced Studies of Photo Degradation on Ziram Using Homogeneous and Heterogeneous Photocatalyst
    K. Ramadevi, S. K. Shivaranjani
Cover for Recent Developments in Engineering Research  Vol. 7
Published
October 14, 2020

Details about the available publication format: Purchase Book

ISBN-13 (15)
978-93-90431-11-3

Details about the available publication format: PDF

ISBN-13 (15)
978-93-90431-19-9

Article Metrics

PlumX

See Details