Recent Developments in Engineering Research Vol. 5

Authors

Dr. Salisu Muhammad Lawan, (Editor)
Assoc. Prof., Department of Electrical and Electronics Engineering, Kano University of Science and Technology (KUST) Wudil, Nigeria.
Hamid Fardi
University of Colorado, Denver Colorado, 1200 Larimer Square, CO 80217-3364, USA.
Z. D. Kovziridze
Department of Chemical and Biological Technologies, Georgian Technical University, Tbilisi, Georgia.
N. S. Nizharadze
Department of Chemical and Biological Technologies, Georgian Technical University, Tbilisi, Georgia.
G. Tabatadze
Department of Chemical and Biological Technologies, Georgian Technical University, Tbilisi, Georgia.
M. Mshvildadze
Department of Chemical and Biological Technologies, Georgian Technical University, Tbilisi, Georgia.
E. Nikoleishvili
Department of Chemical and Biological Technologies, Georgian Technical University, Tbilisi, Georgia.
Z. Mestvirishvili
Department of Chemical and Biological Technologies, Georgian Technical University, Tbilisi, Georgia.
Chávez-Sandoval Blanca Estela
Department of Biochemistry, National School of Biological Sciences, Instituto Politecnico Nacional. Prolongación de Carpio and Plan de Ayala s/n, Miguel Hidalgo 11340, Mexico City, Mexico and Department of Energy, Universidad Autónoma Metropolitana Unidad Azcapotzalco. San Pablo av. 180 Col. Reynosa Tamaulipas, Azcapotzalco 02200, Ciudad de México, México and Department of Applied Mathematics and Systems, Universidad Autónoma Metropolitana Unidad Cuajimalpa, Av. Vasco de Quiroga 4871, Col. Santa Fe 05348, Ciudad de México. México.
A. Ibáñez-Hernández Miguel Angel
Department of Biochemistry, National School of Biological Sciences, Instituto Politecnico Nacional. Prolongación de Carpio and Plan de Ayala s/n, Miguel Hidalgo 11340, Mexico City, Mexico.
García-Franco Francisco
Department of Basic Sciences, Universidad Autónoma Metropolitana-Azcapotzalco. San Pablo av. 180 Col. Reynosa Tamaulipas, Azcapotzalco 02200, Mexico City, Mexico.
Galindo-Pérez Ezel Jacome
Department of Energy, Universidad Autónoma Metropolitana Unidad Azcapotzalco. San Pablo av. 180 Col. Reynosa Tamaulipas, Azcapotzalco 02200, Ciudad de México, México. and Faculty of Professional Studies Iztacala, Universidad Nacional Autónoma de México. De los Barrios av. 1. Col. Los Reyes Iztacala. Tlalnepantla C.P. 54090, Estado de México, Mexico.
Abrica González Paulina
Department of Basic Sciences, Professional Interdisciplinary Biotechnology Unit, Instituto Politecnico Nacional. Acueducto de Guadalupe av. s/n, Gustavo A Madero 07340, Ciudad de México, Mexico.
Martínez-Jiménez Anatolio
Department of Basic Sciences, Universidad Autónoma Metropolitana-Azcapotzalco. San Pablo av. 180 Col. Reynosa Tamaulipas, Azcapotzalco 02200, Mexico City, Mexico.
Balderas López José Abraham
Department of Basic Sciences, Professional Interdisciplinary Biotechnology Unit, Instituto Politecnico Nacional. Acueducto de Guadalupe av. s/n, Gustavo A Madero 07340, Ciudad de México, Mexico.
Binu Sharma
Department of Civil Engineering, Assam Engineering College, Assam, India.
S. K. Rahman
Department of Civil Engineering, Assam Engineering College, Assam, India.
Panagis G. Papadopoulos
Department of Civil Engineering, Aristotle University of Thessaloniki, Greece.
Christopher G. Koutitas
Department of Civil Engineering, Aristotle University of Thessaloniki, Greece.
Panos P. Lazaridis
Department of Civil Engineering, Aristotle University of Thessaloniki, Greece.
Larbi Hamiche
LSELM Badji-Mokhtar University, BP 12, Annaba 23000, Algeria.
Salah Saad
LSELM Badji-Mokhtar University, BP 12, Annaba 23000, Algeria.
Leila Merabet
LSELM Badji-Mokhtar University, BP 12, Annaba 23000, Algeria.
Fares Zaamouche
Department of Mining Engineering, Faculty of Science and Technology, Larbi Tebessi University, Algeria
Lizhi Zhang
School of Control Science and Engineering, Shandong University, Jingshi Road 17923, Jinan 250061, China.
Fan Li
School of Control Science and Engineering, Shandong University, Jingshi Road 17923, Jinan 250061, China.
Bo Sun
School of Control Science and Engineering, Shandong University, Jingshi Road 17923, Jinan 250061, China.
Chenghui Zhang
School of Control Science and Engineering, Shandong University, Jingshi Road 17923, Jinan 250061, China.
Aws Zuhair Sameen
Department of Medical Instrumentation Engineering Techniques, College of Medical Techniques, Al-Farahidi University, Baghdad, Iraq.
Rosmina Jaafar
Department Electrical, Electronic & Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM), Bangi, Malaysia.
Mohammed Hasan Alwan
Department of Communication, Faculty of Engineering, University of Diyala, Baqubah, Iraq.
Jerzy Ratajski
Faculty of Mechanical Engineering, Koszalin University of Technology, Poland.
Roman Olik
Faculty of Mechanical Engineering, Koszalin University of Technology, Poland.
Tomasz Suszko
Faculty of Mechanical Engineering, Koszalin University of Technology, Poland.
Jerzy Dobrodziej
Institute for Sustainable Technology, Radom, Poland.
Jerzy Michalski
Institute of Precision Mechanics, Warsaw, Poland.
Renita Sharon Monis
Mathematics Department, M.I.T.E, Moodabidri, Karnataka, India, affiliated to VTU Belgaum. and SMVITM, Bantakal, Karnataka, India, affliated to VTU Belgaum
Asha Crasta
Mathematics Department, M.I.T.E, Moodabidri, Karnataka, India, affiliated to VTU Belgaum.
Sher Afghan Khan
Department of Mechanical Engineering, Faculty of Engineering, IIUM, Gombak Campus, Kuala Lumpur, Malaysia

Synopsis

This book covers key areas of engineering and other related fields. The contributions by the authors include silicon carbide, MOSFET, ionization coefficients, mobility, semiconductor device modeling, on-resistance, breakdown voltage, composite, silicon carbide, nitrogen area, silicon oxynitride, resistance, biologic method, biosynthesis, plant extracts, gold nanoparticles, electron microscopy, standard penetration test, shear wave velocity, liquefaction, contour map, GIS based maps, subsurface investigation, 2D flow simulation, inter-colliding point-particles, incremental static analysis, incompressible rhombic element, hydro-static pressure distribution, flow from a vessel to another one, “pocket” special purpose computer program, active power filter, harmonics currents, ADALINE neural network, “pq” theory, Fourier series, combined cooling, heating, and power system, renewable energy source, biogas, optimized design, multi-objective optimization, system identification, Autoregressive exogenous (ARX), biomedical applications, in situ visualization, surface treatment process, gas nitriding process, damping derivative, delta wing, hypersonic, curved leading edge etc. This book contains various materials suitable for students, researchers and academicians in the field of engineering.

Chapters

  • Chapter 1
    Simulation and Design of Vertical Power MOSFETs utilizing Silvaco’s ATLASTM
    Hamid Fardi
  • Chapter 2
    Research on Composite Stable to Corrosive Media in SiC-AL2O3-Si2ON2 System
    Z. D. Kovziridze, N. S. Nizharadze, G. Tabatadze, M. Mshvildadze, E. Nikoleishvili, Z. Mestvirishvili
  • Chapter 3
    Critical Research on Biological Synthesis and Characterization of Gold Nanoparticles (AuNPs), Using Plant Extracts
    Chávez-Sandoval Blanca Estela, A. Ibáñez-Hernández Miguel Angel, García-Franco Francisco, Galindo-Pérez Ezel Jacome, Abrica González Paulina, Martínez-Jiménez Anatolio, Balderas López José Abraham
  • Chapter 4
    Spatial Variability of Subsoil Properties of Guwahati City Using GIS Based Maps
    Binu Sharma, S. K. Rahman
  • Chapter 5
    Critical Study on Incremental Static Analysis of 2D Flow, by Inter-Colliding Point-Particles, by Use of In-Compressible Rhombic Element
    Panagis G. Papadopoulos, Christopher G. Koutitas, Panos P. Lazaridis
  • Chapter 6
    Harmonic Current Identification by Adaline Neural Network and Real-Imaginary Instantaneous Powers Algorithm
    Larbi Hamiche, Salah Saad, Leila Merabet, Fares Zaamouche
  • Chapter 7
    A Comprehensive Study on Integrated Optimization Design of Combined Cooling, Heating, and Power System Coupled with Solar and Biomass Energy
    Lizhi Zhang, Fan Li, Bo Sun, Chenghui Zhang
  • Chapter 8
    Assessment of ARX System Identification for Biomedical Applications
    Aws Zuhair Sameen, Rosmina Jaafar, Mohammed Hasan Alwan
  • Chapter 9
    Emphasizing on Design, Control and in situ Visualization of Gas Nitriding Processes
    Jerzy Ratajski, Roman Olik, Tomasz Suszko, Jerzy Dobrodziej, Jerzy Michalski
  • Chapter 10
    Recent Assessment and Analysis of Damping Derivatives for Delta Wings in Hypersonic Flow for Curved Leading Edges with Full Sine Wave
    Renita Sharon Monis, Asha Crasta, Sher Afghan Khan
Cover for Recent Developments in Engineering Research Vol. 5
Purchase Book
Media Promotion: Chapter 01
Media Promotion: Chapter 02
Media Promotion: Chapter 03
Media Promotion: Chapter 04
Media Promotion: Chapter 05
Media Promotion: Chapter 06
Media Promotion: Chapter 07
Media Promotion: Chapter 08
Media Promotion: Chapter 09
Media Promotion: Chapter 10
Published
September 23, 2020
DOI: https://doi.org/10.9734/bpi/rder/v5
Copyright (c) 2020 Authors. The licensee is the publisher (Book Publisher International).

Details about the available publication format: Purchase Book

ISBN-13 (15)
978-81-947979-5-1

Details about the available publication format: PDF

ISBN-13 (15)
978-81-947979-6-8

Article Metrics

PlumX

See Details