Emerging Trends in Engineering Research and Technology Vol. 10

Authors

Dr. Natt Makul, (Editor)
Assistant Professor, Building Technology, Faculty of Industrial Technology, Phranakhon Rajabhat University, Thailand.
G. Ragul
Department of Mechanical Engineering, Budge Budge Institute of Technology, Kolkata, India and Saveetha School of Engineering, SIMATS, Chennai, India.
C. Venkataramana Reddy
School of Engineering and Technology, GIET University, Odisha, India.
Débora Andréa de Oliveira Santos
Department of Electrical Engineering, Pontifical Catholic University of Rio de Janeiro (PUC-Rio), Rio de Janeiro, RJ, Brazil.
Luiz Alencar Reis da Silva Mello
Department of Electrical Engineering, Pontifical Catholic University of Rio de Janeiro (PUC-Rio), Rio de Janeiro, RJ, Brazil.
Marco Antonio Grivet Mattoso Maia
Department of Electrical Engineering, Pontifical Catholic University of Rio de Janeiro (PUC-Rio), Rio de Janeiro, RJ, Brazil.
Krzysztof Z. Sokalski
Institute of Computer Sciences, Częstochowa University of Technology, Częstochowa, Poland.
Bartosz Jankowski
Tele and Radio Research Institute, Warszawa, Poland.
Barbara Ślusarek
Tele and Radio Research Institute, Warszawa, Poland.
Yogesh Iyer Murthy
Jaypee University of Engineering and Technology, Guna, India.
Aakash Agarwal
Jaypee University of Engineering and Technology, Guna, India.
Anupriya Pandey
Jaypee University of Engineering and Technology, Guna, India.
P. Ilanchezhian
IT, Sona College of Technology, Salem TN, India.
K. Thangaraj
IT, Sona College of Technology, Salem TN, India.
J. Jeba Emilyn
IT, Sona College of Technology, Salem TN, India.
S. Vasanthi
IT, Sona College of Technology, Salem TN, India.
J. L. Aldo Stalin
IT, Sona College of Technology, Salem TN, India.
Sheikh Manjura Hoque
Materials Science Division, Atomic Energy Centre, Dhaka – 1000, Bangladesh.
Harinarayan Das
Materials Science Division, Atomic Energy Centre, Dhaka – 1000, Bangladesh.
Nipa Debnath
Departtment of Physics, Jagannath University, Dhaka – 1100, Bangladesh.
Md. Tanvir Hasan
Departtment of Physics, Chittagong University, Bangladesh.
D. P. Paul
Departtment of Physics, Chittagong University, Bangladesh.
S. S. Sikder
Departtment of Physics, Chittagong University, Bangladesh.
Kamanio Chattopadhayay
Department of Materials Engineering, Indian Institute of Science, Bangalore, India.
Salah Noori Alnomani
Department of Mechanical Engineering, University of Kerbala, College of Engineering, Kerbala, Iraq.
M. S. Sreekanth
Department Polymer Engineering & Technology, Institute of Chemical Technology, Matunga, Mumbai-400019, India.
V. A. Bambole
Department of Applied Physics, Institute of Chemical Technology, Matunga, Mumbai-400019, India.
S. T. Mhaske
Department Polymer Engineering & Technology, Institute of Chemical Technology, Matunga, Mumbai-400019, India.
P. A. Mahanwar
Department Polymer Engineering & Technology, Institute of Chemical Technology, Matunga, Mumbai-400019, India
C. T. Abdul Majeed
Noorul Islam Centre for Higher Education, Kumaracoil, Thuckalay, Tamilnadu, India.
M. Ilankumaran
Noorul Islam Centre for Higher Education, Kumaracoil, Thuckalay, Tamilnadu, India.
M. B. Kulkarni
Department Polymer Engineering, Maharashtra Institute of Technology, Kothrud, Pune, 411038, India.
Sânia M. B. de Andrade
Post-Graduate Program in Mechanical Engineering, Federal University of Rio Grande do Norte, Natal, Brazil.
Rasiah Ladchumananandasivam
Post-Graduate Program in Mechanical Engineering, Federal University of Rio Grande do Norte, Natal, Brazil.
Brismak G. da Rocha
Post-Graduate Program in Mechanical Engineering, Federal University of Rio Grande do Norte, Natal, Brazil.
Débora D. Belarmino
Post-Graduate Program in Mechanical Engineering, Federal University of Rio Grande do Norte, Natal, Brazil.
Alcione O. Galvão
Post-Graduate Program in Mechanical Engineering, Federal University of Rio Grande do Norte, Natal, Brazil.

Synopsis

This book covers key areas of engineering and technology and other related fields. The contributions by the authors include ducted wind turbine, tall buildings, permanent magnet rotor, Catia V5, computational fluid dynamics, vapour compression refrigeration, varying area augmented evaporator, coefficient of performance, waste heat recovery, decomposition, benders, green networks, optimization, traffic engineering, soft magnetic composites, scaling, binary relations, pseudo-state equation, mill scale, fine aggregate, concrete, sustainability, combinational logic circuit, sequential logic circuits, QCA, majority gate, MgFe2O4, nanograins, superparamagnetic, B-H curves, transport properties, stability, finite element method, pipe conveyed fluid, linear spring stiffness, polymer composites, polyester thermoplastic, mica, second language acquisition, language skills, programmed instruction, digital devices, first language Influence, Poly (Methyl Methacrylate) (PMMA), Fly Ash Cenospheres (FAC), Methyl Methacrylate–Acrylonitrile -Butadiene–Styrene (MABS), mechanical and thermal properties, chitin, chitosan, nanomembranes, crystallinity, shrimp, crab etc. This book contains various materials suitable for students, researchers and academicians in the field of engineering and technology.

Chapters

  • Chapter 1
    A Study on Performance Investigation, Simulation and Testing of Vertical Axis Wind Turbine with Omni-Directional Duct for Tall Building in Urban Location
    G. Ragul, C. Venkataramana Reddy
  • Chapter 2
    Recent Studies on Design and Thermal Analysis of a Condenser Waste Heat Recovery Vapour Compression Refrigerator with Augmented Accelerated Flow Evaporator
    G. Ragul, C. Venkataramana Reddy
  • Chapter 3
    Decomposition Techniques in Mathematical Programming Applied to Energy-Aware Traffic Engineering Optimization
    Débora Andréa de Oliveira Santos, Luiz Alencar Reis da Silva Mello, Marco Antonio Grivet Mattoso Maia
  • Chapter 4
    Equivalence Relation and Scaling in Solving Engineering Problems of the Magnetic Materials
    Krzysztof Z. Sokalski, Bartosz Jankowski, Barbara Ślusarek
  • Chapter 5
    Recent Observations on the Characterization of Mill Scale for Potential Application in Construction Industry
    Yogesh Iyer Murthy, Aakash Agarwal, Anupriya Pandey
  • Chapter 6
    Describing the Design of Nanotechnology Based Hazard Free Digital Circuit using Quantum Dot Cellular Automata
    P. Ilanchezhian, K. Thangaraj, J. Jeba Emilyn, S. Vasanthi, J. L. Aldo Stalin
  • Chapter 7
    Properties of MgFe2O4 Nanocrystallites to Bulk
    Sheikh Manjura Hoque, Harinarayan Das, Nipa Debnath, Md. Tanvir Hasan, D. P. Paul, S. S. Sikder, Kamanio Chattopadhayay
  • Chapter 8
    Assessment and Investigation of Vibration Characteristics for Simply Supported Pipe Conveying Fluid by Mechanical Spring
    Salah Noori Alnomani
  • Chapter 9
    Studies on the Effect of Concentration of Mica on Properties of Polyester Thermoplastic Elastomer Composites
    M. S. Sreekanth, V. A. Bambole, S. T. Mhaske, P. A. Mahanwar
  • Chapter 10
    The Effect of Acquiring Second Language Skills through Programmed Instruction: A Study
    C. T. Abdul Majeed, M. Ilankumaran
  • Chapter 11
    Investigating the Effect of Methyl Methacrylate– Acrylonitrile -Butadiene–Styrene (MABS) on the Mechanical and Thermal Properties of Poly (Methyl Methacrylate) (PMMA)-Fly Ash Cenospheres (FAC) Filled Composites
    M. B. Kulkarni, P. A. Mahanwar
  • Chapter 12
    Recent Studies on the Use of Exoskeletons of Shrimp (Litopenaeus vanammei) and Crab (Ucides cordatus) for the Extraction of Chitosan and Production of Nanomembrane
    Sânia M. B. de Andrade, Rasiah Ladchumananandasivam, Brismak G. da Rocha, Débora D. Belarmino, Alcione O. Galvão
Cover for Emerging Trends in Engineering Research and Technology Vol. 10
Media Promotion: Chapter 01
Media Promotion: Chapter 02
Media Promotion: Chapter 03
Media Promotion: Chapter 04
Media Promotion: Chapter 05
Media Promotion: Chapter 06
Media Promotion: Chapter 07
Media Promotion: Chapter 08
Media Promotion: Chapter 09
Media Promotion: Chapter 10
Media Promotion: Chapter 11
Media Promotion: Chapter 12
DOI: https://doi.org/10.9734/bpi/etert/v10
Copyright (c) 2020 Authors. The licensee is the publisher (Book Publisher International).

Details about the available publication format: PDF

ISBN-13 (15)
978-93-90206-84-1

Article Metrics

PlumX

See Details