Emerging Trends in Engineering Research and Technology Vol. 9

Authors

Dr. Suraya Hani Bt Adnan, (Editor)
Associate Professor, Department Civil Engineering Technology, Faculty of Engineering Technology, Universiti Tun Hussein Onn Malaysia, Malaysia.

Profile Link:  https://community.uthm.edu.my/suraya  

Short Biosketch

Chinedu James Ujam
Department of Industrial and Production Engineering, Nnamdi Azikiwe University, Awka, Nigeria.
Harold Chukwuemeka Godwin
Department of Industrial and Production Engineering, Nnamdi Azikiwe University, Awka, Nigeria.
Hidetaka Noritomi
Department of Applied Chemistry, Tokyo Metropolitan University, Tokyo, Japan.
Matthew Edwards
Department of Physics, Chemistry & Mathematics, Alabama A&M University, Normal, AL, USA.
Stephen Egarievwe
Department of Engineering, Construction Management & Industrial Technology, Alabama A&M University, Normal, USA.
Afef Janen
Department of Physics, Chemistry & Mathematics, Alabama A&M University, Normal, AL, USA.
Tatiana Kukhtarev
Department of Physics, Chemistry & Mathematics, Alabama A&M University, Normal, AL, USA.
Abdullahi Abuh
Department of Electrical/Electronic Engineering, Federal Polytechnic Idah, Kogi State, Nigeria.
Patience E. Orukpe
Department of Electrical/Electronic Engineering, University of Benin, Edo State, Nigeria.
D. Hari Priya
Department of Electronics and Communication Engineering, Anurag Group of Institutions, Hyderabad, India.
K. S. Rao
K L University, Andhra Pradesh, India.
Venu Madhav Gopala
Department of EEE, Anurag Group of Institutions, Ghatkesar, Medak District, Telangana State, India.
Lahari Lakki
Department of EEE, Anurag Group of Institutions, Ghatkesar, Medak District, Telangana State, India.
Y. P. Obulesu
School of Electrical Engineering, VIT, Vellore, Tamil Nadu, India.
Laura Marcela Machuca
Instituto de Investigaciones Científicas (IDIC), Facultad de Ingeniería y Tecnología, Universidad de la Cuenca del Plata (UCP). Corrientes 57, (3450) Goya, Corrientes, Argentina and Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Godoy Cruz 2290 (C1425FQB) Buenos Aires, Argentina.
Marcelo César Murguía
Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Godoy Cruz 2290 (C1425FQB) Buenos Aires, Argentina and Laboratorio de Química Aplicada (LAQUIMAP). Facultad de Bioquímica y Ciencias Biológicas, Universidad Nacional del Litoral (UNL). CC 242 Ciudad Universitaria, Ruta Nacional 168 (S3000ZAA) Santa Fe, Argentina.
Z. Abdel Hamid
Central Metallurgical Research & Development Institute (CMRDI), Helwan, Cairo, Egypt.
M. Ibrahim
SHM for Metal Industries, Obour City, Cairo, Egypt.
G. Ragul
Department of Mechanical Engineering, Budge Budge Institute of Technology, Kolkata, India and Saveetha School of Engineering, SIMATS, Chennai, India.
Bi Bi Zainab Mazahri
Department of Microbiology, A-DBT Research Laboratory, Gulbarga University, Kalaburagi 585 106, Karnataka, India.
Dayanand Agsar
Department of Microbiology, A-DBT Research Laboratory, Gulbarga University, Kalaburagi 585 106, Karnataka, India.
M. V. N. Ambika Prasad
Department of Microbiology, A-DBT Research Laboratory, Gulbarga University, Kalaburagi 585 106, Karnataka, India.
M. Laavanya
Department of Electronics and Communication Engineering, Vignan’s Foundation for Science, Technology and Research, Vadlamudi, Guntur, AP, India.
V. Vijayaraghavan
Department of Electronics and Communication Engineering, Vignan’s Foundation for Science, Technology and Research, Vadlamudi, Guntur, AP, India.
M. Duraisamy
Thiruvalluvar University College of Arts and Science, Tirupattur – 635901, Tamil Nadu, India.
T. Logeswari
New Horizon College, Banglore, Karnataka, India.

Synopsis

This book covers key areas of engineering and technology and other related fields. The contributions by the authors include lean and quality management; variation and waste assessment; supplier’s selection criteria, Toyota production system performance; microemulsion; reverse micelle; Winsor II; alkyl glucoside; solubilization; organic dye; adsorption; characterization; plant biomass charcoal; α-chymotrypsin; protein; protein refolding; dilution method; surfactant; hen egg-white lysozyme; reverse micelle; silver nanoparticle; size control; solid-liquid extraction; sucrose fatty acid ester; silver nano-particles; surface resistivity; Multiwall Carbon Nanotubes (MWCNT); Polyvinyl Alcohol (PVA) films; access control; campus security system; emergency alerting; fingerprint biometrics; surveillance system; cardiac arrhythmia; Tompkins algorithm; CSA and Wallace multiplier; dual sliding mode proportional and integral controller; proportional and integral controller; front-end circuit; switched reluctance motor; N-aryl pyrazole; aryl hydrazine; Tuta absoluta; 5-Amino-1-aryl-1H-pyrazole-4-carbonitriles; hot-dip galvanizing process; corrosion; potentiodynamic polarization; EIS; salt spray; wheel rim; aluminum alloy; magnesium alloy; material reduction; finite element method; solid works and ansys; streptomyces; tyrosinase; nanoparticles; bioconjugate; biosensor; phenol; convolution neural network; currency detection; deep learning; feature extraction; image processing; pre-processing; enhancement; median filter; adaptive filter; weighted median filter; ant colony optimization etc. This book contains various materials suitable for students, researchers and academicians in the field of engineering and technology.

Chapters

  • Chapter 1
    Critical Study on Application of Lean and Quality Management in AB Brewery
    Chinedu James Ujam, Harold Chukwuemeka Godwin
  • Chapter 2
    Experiments on the Formation and Solubilization Property of Water-in-Oil Microemulsions of Alkyl Glucosides
    Hidetaka Noritomi
  • Chapter 3
    Experimental Study on Adsorption of α-Chymotrypsin on Plant Biomass Charcoal
    Hidetaka Noritomi
  • Chapter 4
    Study on Efficient Protein Refolding Using Surfactants at High Final Protein Concentration
    Hidetaka Noritomi
  • Chapter 5
    Experimental Study on Preparation of Highly Concentrated Silver Nanoparticles in Reverse Micelles of Sucrose Fatty Acid Esters through Solid-Liquid Extraction Method
    Hidetaka Noritomi
  • Chapter 6
    Current Versus Voltage Relationships and Temperature Dependent Surface Resistivity Measurements of Commercial, Multiwall Carbon Nanotubes (MWCNT), and Silver Nano-Particle Doped Polyvinyl Alcohol (PVA) Thin Films
    Matthew Edwards, Stephen Egarievwe, Afef Janen, Tatiana Kukhtarev
  • Chapter 7
    Development of an Integrated Campus Security Alertng and Access Control System
    Abdullahi Abuh, Patience E. Orukpe
  • Chapter 8
    FPGA Based Design and Implementation for Detecting Cardiac Arrhythmias: An Experimental Approach
    D. Hari Priya, K. S. Rao
  • Chapter 9
    Performance Comparison of DSM-PI and PI Controller Based Switched Reluctance Motor Drive at Different Load Conditions
    Venu Madhav Gopala, Lahari Lakki, Y. P. Obulesu
  • Chapter 10
    Design, Synthesis and Insecticidal Activities of Novel Pirazol Derivatives to Crop Protection
    Laura Marcela Machuca, Marcelo César Murguía
  • Chapter 11
    Preparation, Characterization, Performance of the Galvanized Steel Using Sn as Alloying Element to Promote the Corrosion Resistance
    Z. Abdel Hamid, M. Ibrahim
  • Chapter 12
    Critical Studies on Design, Analysis and Impact Behaviour of Magnesium Alloys (ZK60A) of Low Pressure Die Casting for Automotive Wheels by Finite Element Method
    G. Ragul
  • Chapter 13
    Experimental Study on the Development of Paper Biosensor for the Detection of Phenol from Industrial Effluents Using Bioconjugate of Tyr-AuNps Mediated by Novel Isolate Streptomyces tuirus DBZ39
    Bi Bi Zainab Mazahri, Dayanand Agsar, M. V. N. Ambika Prasad
  • Chapter 14
    Scientific Approach of Real Time Fake Currency Note Detection Using Deep Learning
    M. Laavanya, V. Vijayaraghavan
  • Chapter 15
    Brain Tumor Image Segmentation Using Ant Colony Optimization Technique
    M. Duraisamy, T. Logeswari
Cover for Emerging Trends in Engineering Research and Technology Vol. 9
Published
August 17, 2020

Details about the available publication format: Purchase Book

ISBN-13 (15)
978-93-90206-36-0

Details about the available publication format: PDF

ISBN-13 (15)
978-93-90206-37-7

Article Metrics

PlumX

See Details